Refinish, or replace
A structurally sound solid hardwood floor can typically be sanded and refinished several times over its life for a fraction of the cost of replacement. If boards are cracked, badly water-stained, or the subfloor beneath shows rot, refinishing hides a bigger problem, moisture and structural issues need to be addressed first.
In homes with engineered hardwood, refinishing is limited by the thickness of the top wear layer, thin veneers may only tolerate one light refinish before replacement becomes the only option.
Material types and installed cost
Most replacements are engineered hardwood or LVP designed to look like wood, both handle humidity swings better than solid hardwood in moisture-prone rooms.
- Sand and refinish existing hardwood: $3 – $8 per sq. ft.
- Engineered hardwood, new install: $6 – $12 per sq. ft. installed
- Solid hardwood, new install: $8 – $15 per sq. ft. installed
- Wood-look LVP, new install: $4 – $9 per sq. ft. installed
Source: Reference ranges for professionally installed flooring projects across Central Pennsylvania, aggregated from full-service installer quote data ((HomeGuide, 2024), (Angi, 2024)) and adjusted for the local market using regional construction-cost indices ((RSMeans CCI, 2024)). ROI benchmarks cross-checked against (Cost vs. Value, 2024). Not a quote; actual bids depend on your specific rooms and subfloor condition.
Timeline and disruption
A standard refinish takes 3–5 days including dry time between coats, and the room is generally unusable during that window. A full replacement with new material runs 2–4 days depending on square footage and whether subfloor work is needed.
Still deciding if hardwood refinishing vs. replacement (greater pittsburgh) is actually the right project for your home? Start with the guide, I'll help you compare it against the other options in about 2 minutes and you'll walk away with a plan either way.
See your personalized remodel plan in 2 minutes
Tell me a bit about you and I'll tailor the plan to your home and budget. No pressure, no obligation.
Frequently asked questions
Can I refinish engineered hardwood the same way as solid hardwood?+
Sometimes, but only if the wear layer is thick enough. Many engineered floors have a thin veneer that tolerates just one light refinish before replacement becomes the only real option.
How long does hardwood refinishing take?+
3–5 days for a standard refinish including dry time between coats. Full replacement typically runs 2–4 days depending on square footage and subfloor condition.
Is refinishing a good fit for older Pittsburgh homes?+
Often yes, older solid hardwood floors were milled thicker than most of today's engineered products and can usually take several more refinishing cycles if the subfloor underneath is sound.
Will new flooring help or hurt resale value?+
Updated flooring is generally neutral to positive for resale in most markets, and buyers usually respond well to consistent flooring throughout main living areas.
Related guides
Popular Central Pennsylvania guides
Ready to see your remodel profile? FloorGuide is a 2-minute guided conversation, not a contractor form, you'll see your personalized plan before sharing anything. Matching with a local provider is optional.
See your personalized remodel plan in 2 minutes
Tell me a bit about you and I'll tailor the plan to your home and budget. No pressure, no obligation.